For this unique headboard design, we used a vertical treatment of our popular
shiplap tiles, giving the piece a striking, upward energy. And with the fresh look of
Kiwi played against a subtle Nickel center stripe, these are colors you’ll definitely
enjoy waking up to!
In a room with bare, reflective surfaces, sound bounces back and forth, distorting direct sound and serving to drastically diminish our listening experience.
Felt Right tiles have an NRC (Noise Reduction Coefficient) of 35 and can absorb as much sound as one-inch thick polyurethane foam, a popular sound dampening material. In other words, installing Felt Right tiles on a single wall of your living or working space will noticeably improve the overall accoustical experience.
What Gives Felt Right Tiles Their High-Quality, Beautiful Appearance?
Our felt panels have a warm, wool-like appearance with durable and wear-resistant constructions. Using a high-density, engineered PET felt board, beautiful chamfered edges, and engraved patterns that reflect your creativity, we fabricate our felt wall tiles to your exact specifications.
How Effective are Felt Right Tiles at Dampening Sound?
Felt Right tiles have an NRC (noise reduction coefficient) of .35. That means they absorb roughly 35% of the sound they come in contact with. Felt Right’s tiles often have a noticeable effect on your space’s acoustics, but the level they affect your sound depends on the surface.
Will My Tiles Work With Pins?
Felt Right tiles work with pins because we make them using high-quality, dense PET felt board. The PET felt board makes them perfect for pinning and repinning as many times as you want.
What Are Felt Right Tiles Made From?
We make Felt Right tiles from 100% PET plastic. Using PET plastic improves our sustainability and reduces our environmental impact. By reclaiming at least 50% of the plastic we use from discarded water bottles, we keep four water bottles out of the waste stream with every 12x12 felt wall tile we use.
How Do Felt Right Tiles Contribute to Healthy Indoor Air Quality?
Felt Right tiles adhere to strict quality standards and ensure our products do not contain any red-list chemicals or materials harmful to your health . Our materials have also been tested to confirm they do not emit any harmful gasses into the places where you install your designs.
Where Are Felt Right Tiles Made?
We make our felt panels in-house in Salt Lake City, UT. Our headquarters are located at the base of the beautiful Wasatch Mountain Range, which provide a backdrop almost as beautiful as our custom felt wall designs.
What Are the Felt Right Tile Sizes?
Felt Right tiles come in five distinct sizes designed to work together in our Design Studio:
Note that the felt wall dimensions are nominal, and exact measurements are slightly smaller. For example, 12” tiles are actually 11 ⅞”. Visit our product pages for their exact dimensions.
Can Tiles Be Cut on Site to Specific Sizes?
Yes, we can cut our tiles to specific sizes and dimensions using a craft knife and a straight edge.
What Is the Tile Thickness?
Felt Right tiles are ⅜ inch or 9mm thick.
Do Felt Right Tiles Reduce Sound Transmission From or Through a wall?
Our felt tiles deaden sound transmission from nearby spaces. Multiple customer reviews highlight this benefit. However, we have not fully calibrated Felt Right tiles Sound Transmission Coefficient (STC), so we can’t accurately calculate the sound reduction range.
Do Felt Right Tiles Meet Flammability Requirements for Commercial Applications?
Yes. Made with material that has undergone ASTM E-84 testing, our felt panels are considered a Class B material for commercial specifications.
Will Quilting Fabric Designs Stick to Felt Right Tiles Without Pins?
No. Quilting designs will not stick to Felt Right tiles without pins. However, many quilters use pin boards to showcase their designs.
What Is Required to Install My Felt Right Tiles?
We use easy-installation methods for our felt tiles that only require a tape measure, level, and pencil. After aligning your first few tiles, your design should be easy to complete. Most felt wall designs take less than an hour.
Are Adhesive Tabs Included in My Felt Right Order?
Every order of Felt Right tiles comes with plenty of adhesive tabs for installation. We also provide a few extra just in case you lose a few.
Can I Purchase Extra Adhesive Tabs?
Yes, to purchase extra adhesive tabs, visit our Shop section.
Are Felt Right Tiles Safe For My Walls?
Felt wall removal is simple and does not damage your walls. Our proprietary, paint-safe adhesives, make them safe for painted walls. Upon removing the adhesive, it releases from the tile, leaving the 1”x1” adhesive squares on the wall. You can then remove the remaining squares by peeling them off with your hands.
How Easy Is It to Clean Felt Right Tiles?
Our felt wall panels are easy to clean and maintain. To remove dust, all you need is a vacuum wand or hose. For spot cleaning, all you need is a damp rag or household cleaner to spray the tiles and wipe them down. For high-traffic, commercial applications, you can disinfect Felt Right tiles with common cleaning products.
Can I Relocate a Tile Once It’s in Place?
Of course. We include extra adhesive tabs in all of our orders. These extra tabs let you reposition one or two tiles during the installation process. If you find you need to move more tiles, you can always order extra adhesive squares.
How Should Felt Right Tiles Best Be Positioned to Dampen Sound?
Sound waves will typically reverberate between parallel surfaces. Because of this, positioning your felt wall panels on parallel walls is most useful to interrupt sound wave reverberation.
Can the Tiles Be Used in Ceiling Applications?
Yes, you can use Felt Right tiles in ceiling applications. The Felt Right adhesive tabs can also secure your tiles in an overhead configuration.
Can Felt Right Tiles Be Used in Flooring Applications?
You should not use Felt Right tiles for flooring applications.
Do the Tiles Stick to Textured Walls?
Felt Right adhesive tabs conform to most surfaces, including painted cinder block and textured walls.
What if I Want to Add New Tiles to an Existing Design?
You must consider some specific issues if you plan on adding new tiles to an existing design.
We recently added some slight changes to our finished tile dimensions to further improve their quality. For example, 12" tiles became 11 7/8." This is not a noticeable change except when you try to add new tiles to an existing design. If you finished your initial wall panel design before May of 2020, contact customer service before ordering new tiles.
We experience some dye-lot variations in some colors, which may be noticeable when placing a new tile next to an old one. This variation is most evident with certain shades of gray. If you order new tiles that fit next to existing tiles, notify us so we can help make sure you don't experience dye-lot issues.
How Long Does it Take to Ship an Order?
Most orders ship within 1-2 days. Occasionally, lead times may extend to 5 business days for larger orders or if we’re back-ordered on a specific tile.
What if I am not 100% satisfied With My Order?
No problem. You can return your order for any reason within the first 100 days after your purchase.