These tiles can easily be installed in three simple steps:
1. Prep Your Wall
Clean and dry surface
Lay out your design on the floor first
2. Stick Tabs to Tiles
Place adhesive tabs on the back (corners + center)
Press firmly to activate
3. Press & Align on Wall
Start from center or straight edge
Press firmly on each corner
Check alignment as you go
You can reference our Installation Page for a step by step video explanation as well! This page also goes over cutting the tiles, permanent installations, and layered designs. Click here to view our 4 Spacing Tools for designs with negative space.
Adhesive Removal Disclaimer: While our default adhesive tabs are designed to be removable, removal results may vary. In some cases, tabs may be more difficult to remove or may cause minor damage to paint or wall finishes. Factors such as room temperature, prolonged sun exposure, wall material, surface texture, paint type, paint condition, and the length of time installed can affect adhesive performance. We recommend testing a tab in an inconspicuous area before completing your installation and following all removal instructions carefully.