Engraved Tile Designs
One of our newest, boldest lines of sound absorbing acoustic panels. Pick from pre-configured designs or mix and match color and pattern combinations to fit your space. From bright and cheerful to neutral and calming, you can find or create the perfect colorway for your room.
142.56 in x 71.28 in
118.8 in x 95.04 in
118.8 in x 71.28 in
118.8 in x 71.28 in
47.5 in x 95 in
47.5 in x 95 in
47.5 in x 95 in
47.5 in x 95 in
47.5 in x 95 in
47.5 in x 95 in
47.5 in x 95 in
47.5 in x 95 in
47.5 in x 95 in
Two-Year Warranty
We proudly stand behind the quality and craftsmanship of our products.
Sustainable Materials
Our PET felt is made from at least 50% recycled plastic with no red-list chemicals.
Award-Winning Colors
From bold, rich hues to soft, subtle tones, our 42 colors capture it all!
Easy to Install
Each felt wall design comes with double-sided adhesive tabs for an easy installation.
Frequently Asked Questions
Felt Right tiles are premium, sound-absorbing wall panels made from high-density engineered PET felt. Designed with both acoustic performance and modern design in mind, each tile features a soft, wool-like texture and crisp, chamfered edges for a clean, dimensional finish. At 9mm (3/8 inch) thick, these acoustic tiles are durable, attractive, and easy to install.
Made in the USA, every Felt Right tile is composed of approximately 50% recycled plastic — primarily single-use water bottles — broken down and sterilized without harmful chemicals. The fibers are dyed, felted, and precision-cut into a variety of sizes and shapes to support creative wall treatments for homes, offices, classrooms, and commercial interiors.
Key Features of Felt Right Wall Tiles:
- Material: 100% PET felt (minimum 50% recycled content)
- Thickness: Standard 9mm (⅜ inch); 18mm available for custom orders
- Finish: Chamfered edges for a seamless, dimensional look
- Sound Absorption: NRC rating of 0.35 (absorbs ~35% of ambient sound)
- Eco-Friendly: Helps divert plastic waste from landfills
- Applications: Ideal for acoustic panels, pin boards, creative walls, and design accent
Felt Right tiles are designed to be low-maintenance and easy to clean.
Routine Cleaning:
- Use a vacuum hose attachment to remove dust and lint
- A lint roller can also work for quick surface touch-ups
Spot Cleaning:
- Wipe with a damp cloth
- For more stubborn marks, spray with a common household cleaner and gently wipe down
- Avoid oversaturation to preserve the felt's integrity
Disinfection (Commercial Environments)
- Tiles can be disinfected using multi-surface cleaning sprays or non-abrasive disinfectant wipes
- Ideal for schools, offices, and shared workspaces
Yes! Felt Right tiles can be trimmed to any size using a razor blade and a straight edge (See example here). For the cleanest results, cutting along the engraved pattern lines is easiest, but any custom dimension works fine. For more control or complex shapes, we recommend:
- A serrated utility knife for general cuts
- Standard woodworking tools or a jigsaw for straight edges and angles
- A plywood template and a router with a flush-cut pattern bit for curves
These tiles can easily be installed in three simple steps:
1. Prep Your Wall
Clean and dry surface
Lay out your design on the floor first
2. Stick Tabs to Tiles
Place adhesive tabs on the back (corners + center)
Press firmly to activate
3. Press & Align on Wall
Start from center or straight edge
Press firmly on each corner
Check alignment as you go
You can reference our Installation Page for a step by step video explanation as well! This page also goes over cutting the tiles, permanent installations, and layered designs. Click here to view our 4 Spacing Tools for designs with negative space.
Adhesive Removal Disclaimer: While our default adhesive tabs are designed to be removable, removal results may vary. In some cases, tabs may be more difficult to remove or may cause minor damage to paint or wall finishes. Factors such as room temperature, prolonged sun exposure, wall material, surface texture, paint type, paint condition, and the length of time installed can affect adhesive performance. We recommend testing a tab in an inconspicuous area before completing your installation and following all removal instructions carefully.
Our tiles are made from dense, 9mm PET felt board — ideal for pinning and re-pinning notes, photos, or fabric. Each tile is the same thickness as a standard push pin, and while not fully self-healing, you can use a pinhead to gently blend fibers and minimize visible pin holes. Watch our how-to video here.
Our tiles are crafted using recycled PET felt and dyed in batches, so slight dye-lot variations may occur between orders. While we follow strict color standards, some variation is a natural part of the process.
Planning to expand a design later? Order a few extra tiles now to ensure a perfect match. Have a follow-up order and need help matching? Contact us at support@feltright.com — we're happy to assist!